Express PostFREE on $99+ orders$12.95 below $99Standard$9.95 below $99Order total after discounts.
Delivery estimates & policy
System
Hub
Storage
Built-in storage
Included items: Read this listing's contents before choosing accessories. A condition grade alone does not tell you which parts or packaging are included.
Choose compatible extrasChoose only what your setup needs
Use the regular Add to cart button for this product on its own. Check the setup requirements above and each extra's listing for included parts and firmware requirements.
This adds the product shown above and every selected extra in one step. Use the regular Add to cart button for the product on its own.
Choose your viewThe essentials or the full story. Switch any time.
Runs eufyCam 2C, 2C Pro and battery E40 (T8144), the battery S330 doorbell (T8213) and eufy's alarm sensors; optional hub for C30, C31 and E340 doorbells and four SoloCams. Not eufyCam 3, 3C, S3 Pro, S4, C35 or C37. Check your camera ›
Why HomeBase 2: 16 GB built in, up to 16 cameras and 16 sensors, no monthly fee for local storage.
Manufacturer Renewed: used, then renewed through the manufacturer's renewal process. Cosmetic marks possible.
12-month CamGuard warranty · dispatched from Townsville · free Express on $99+ orders after discounts
HomeBase 2 · Renewed
The numbers
Sixteen, three ways.
16GB
Built in
eMMC for your devices' clips; usable space depends on the system. No expansion promised.
16
Cameras, up to
eufy's ceiling, subject to installation and network. Each model must be on the list below.
16
Sensors, up to
Entry, motion, flood, siren, keypad and more.
No monthly fee for local storage.Need far more room? HomeBase 3 takes a drive up to 16 TB.
Compatibility
Does your gear dock here?
Match each device by its T-number, on its label or in the eufy app.
eufyCam 2C family
eufyCam 2CT8113Runs
eufyCam 2C ProT8142Runs
eufyCam E40, batterynot the PoE Cam E40, T8P00T8144Runs
These can't work without a HomeBase, and HomeBase 2 runs them.
Got a eufyCam E40? The battery E40 (T8144) pairs with HomeBase 2. Update your HomeBase 2's firmware in the eufy app before you pair it. Not sure about yours? Send us a message with your HomeBase 2's details and we'll check it for you.
Doorbells
Video Doorbell S330, battery dual-camneeds a hubT8213Runs
Video Doorbell C30T8224Optional
Video Doorbell C31T8223Optional
Video Doorbell E340T8214Optional
The C30, C31 and E340 also work on their own.
SoloCams
SoloCam S340T8170Optional
SoloCam S220T8134Optional
SoloCam E30T8171Optional
SoloCam E42T8173Optional
Not on HomeBase 2Mini or HomeBase 3
SoloCam S230 (S40) T8124
SoloCam C210 T8B00
They record on their own. Update camera and hub firmware before pairing.
Glass Break Sensor E10hub firmware V3.4.2.2h or laterT90G0Runs
Keypad E10hub firmware v2.1.8.8h or laterT8960Runs
Entry and Motion Sensor, originalT8900 · T8910Runs
Smart Display E10T87A0Supported
Each needs a HomeBase. eufy lists the E20 and E10 sensors for HomeBase 2 units made after 2021, on hub firmware V3.4.1.2 or later.
Newer eufyCams
Not on HomeBase 2Mini or HomeBase 3
eufyCam 3 (S330) T8160
eufyCam S3 Pro T8162
eufyCam C35 T8110
eufyCam C37 2K T814X
C37 4K Edition T814XS
Not on HomeBase 2HomeBase 3
eufyCam 3C (S300) T8161
eufyCam S4, which also runs alone T8172
HomeBase 2 can't run these. We sell HomeBase 3 and HomeBase Mini too.
Indoor, wired and outdoor cameras
Not on HomeBase 2
Indoor, window, wired, floodlight and wall-light cameras, the 4G LTE Cam S330 (T86P2) and the 1 TB Hard Drive: HomeBase 3, most also Mini. PoE cameras: the Professional S1 or a eufy recorder.
Smart locks
Not on HomeBase 2
Video locks, including Smart Lock E40 (T85M0) and Video Smart Lock S330 (T8530): HomeBase 3, some also Mini. App-only locks such as the E34, C33 and C32: no HomeBase.
Pair a C30, C31, E340 or the battery S330 doorbell and HomeBase 2 can ring as the indoor chime.
Talks to Apple Home
eufyCam 2C and 2C Pro work with Apple Home (HomeKit) through HomeBase 2. The battery E40 does too, on hub firmware v3.3.6.9 or newer.
Setting it up
Cable first. Wi-Fi later.
Illustration
Plug it into your router
The Ethernet cable is in the parcel. Power it with the supplied adapter, not a camera's.
Add it in the eufy app
Add Device, scan the hub code, then pair your cameras and sensors to it.
Then cut the cable, if you like
Once it's set up, eufy lets you switch it to 2.4 GHz Wi-Fi in the app: another indoor spot, as long as the connection stays reliable.
Condition · Manufacturer Renewed
Renewed, and ready to run.
ConditionManufacturer Renewed
Used, then renewed
Cosmetic marks possible
Packaging may vary
This hub was used, then renewed through the manufacturer's renewal process, which did the refurbishment and testing. A renewed HomeBase 2 runs the same published spec sheet as a new one.
Expect possible cosmetic marks on the housing. They differ from unit to unit and are cosmetic only. We describe the cosmetics and packaging, and don't claim to have tested your unit ourselves. It arrives in protective packaging; retail packaging may vary.
In the parcel
HomeBase 2 (S280, T8010), renewed
An Australian power adapter, packed separately
Ethernet cable
Printed instruction manual
Metal reset pin
Not included
A retail box: packaging may vary
Cameras, doorbells and sensors
Good to know.
Will it run my eufyCam 3, S4, C35 or C37?
No. eufy lists HomeBase 3 for those, and HomeBase Mini also runs the eufyCam 3, C35 and C37. We sell both.
What happens in a power cut?
It runs on mains power, so it stops during an outage unless a suitable backup supply keeps it running.
When will my order leave Townsville?
We do our best to send orders the same day; same day to 1 business day is typical from Townsville, Queensland. During busy periods it can take a little longer, though that's rare. Australia Post delivery time is on top.
Buying from CamGuard Australia
Sent from Townsville.
Shipping
Australia Post Express is included on orders of $99 or more after discounts. Under $99.00 it's $9.95 tracked, or $12.95 Express.
We aim to dispatch the same day; same day to 1 business day is typical from Townsville, Queensland. During busy periods it can take a little longer, though that's rare.
Warranty
months
Our own 12-month warranty, not a manufacturer warranty, with Australian Consumer Law rights on top. Faulty or not as described? We cover the return postage.
Returns
days
Change of mind within 30 days of delivery, complete and unused. You pay return postage; the original shipping isn't refunded.
Who you're buying from: an independent Australian importer in Townsville, happy to answer questions before you buy.
Use the supplied adapter (Australian, packed separately)
Size
Dimensions
85.1 × 131 × 85.1 mm
Weight
300 g
Where eufy's documents disagree, we follow the most recent one, and where eufy hasn't confirmed a pairing we mark it not compatible until it does.
HomeBase 2 stores footage from compatible eufy devices. It records; it doesn't prevent anything, and detection can miss or mislabel activity.
Product images are official eufy images. Illustrations are labelled.
Our own 12-month warranty applies, not a manufacturer warranty. Nothing here limits your rights under Australian Consumer Law.
CamGuard Australia is an independent importer and reseller, not an official or authorised supplier, distributor or representative of eufy, Anker Innovations or their affiliates. Product names and trademarks belong to their owners.
Details believed accurate at time of listing.
CamGuard Australia · ABN 62 385 894 763 · Townsville, Queensland
CamGuard Australia · Compatibility Laboratory
HomeBase 2 · T8010 · renewed hub
Compatibility check · HomeBase 2 T8010
Paired at first ping.
Previously used and manufacturer renewed. Check your exact camera model before choosing this hub.
Manufacturer Renewed · previously used · possible minor cosmetic marks · non-retail packaging
HUB ROLE: MATCHMAKERCompatible devices send events. HomeBase 2 stores them locally. Exact model check: REQUIRED
01
Specimen intake
Previously used, manufacturer renewed.
Manufacturer Renewed means previously used, then refurbished and tested through eufy’s renewal programme. CamGuard Australia did not perform that renewal work, and the practical packaging is not a factory-sealed retail carton.
Renewed honestly
Specimeneufy Security HomeBase 2 · T8010
ConditionManufacturer Renewed · previously used
Renewal pathRefurbished and tested through the eufy renewal programme
CosmeticsMinor cosmetic marks are possible
PackagingRenewed protective non-retail packaging
System typeIndoor hub for compatible eufy products; not a camera
StorageFixed 16GB eMMC for compatible event recordings
WarrantyCamGuard’s own 12-month cover plus ACL rights
Pairing chamber
Pair only documented compatible models.
Candidate HomeBase 2
Hub for compatible cameras, doorbells and sensors.
Initial setup requires a router LAN connection by Ethernet.
Stores compatible event recordings in fixed 16GB eMMC.
It is not a camera and not a continuous-recording NVR.
PING TEST
Documented match routes
eufyCam 2, 2C, 2 Pro and 2C Pro families
E40 plus documented battery-doorbell routes
E20 and E10 sensors with HomeBase 2 firmware v3.4.1.2 or later
Products documented as HomeBase 3-only
Products documented as HomeBase Mini-only
Hard laboratory gate: send CamGuard the exact model number before ordering if it is not explicitly documented for HomeBase 2. Two white hubs can belong to different generations; appearance is not compatibility evidence.
02
Instrument results
Capabilities and limits.
Check each capability against your device and setup.
16GB fixed
Built-in eMMC for compatible event recordings. There is no SATA bay and no microSD expansion slot.
Up to 16 cameras
The published system ceiling is not a blanket compatibility promise. Exact camera model support still decides the match.
Built-in alarm
The published hub siren supports alarm events. Real behaviour depends on the paired device, settings, firmware and system state.
Event storage
Compatible products send event recordings to the hub. HomeBase 2 is not a continuous 24/7-recording NVR.
Ethernet first
Keep a router LAN port available for initial setup and use the included Ethernet cable.
Indoor hub
Place it on a dry, ventilated indoor shelf with power and suitable network access. It is not weather-rated outdoor hardware.
CONTROL RESULT: recordings, notifications, alarms and access depend on exact-model compatibility, current firmware, power, network conditions, settings and the connected product. HomeBase 2 does not promise prevention, intervention, identification or capture of every event.
Storage observation
16GB built in; USB support needs a separate check.
The built-in 16GB eMMC stores compatible event recordings. It cannot accept the internal SATA drive used with HomeBase 3, and it has no microSD slot.
Recording typeEvents from compatible products; not continuous NVR footage.
Expansion bayNone. No 1TB SATA-drive route applies.
Camera ceilingUp to 16 compatible cameras, subject to exact-model support.
PlacementDry, ventilated indoor shelf with power and network access.
Contact sheet · observations 03 and 04
Model image and condition note.
OBSERVATION 03 · HomeBase 2 · white T8010 hub · renewed stock may show minor cosmetic marks.HB2FIXED 16GB eMMC EVENT RECORDINGS INITIAL ETHERNET LINKHUB · NOT CAMERA · NOT NVR
The product image identifies the model offered. It does not promise factory-sealed presentation, a mark-free casing, cameras, a retail carton or expansion storage.
Evidence tray
What the renewal programme packed.
HomeBase 2Manufacturer Renewed T8010 hub; previously used, refurbished and tested through the eufy renewal programme.Power adapterPower adapter with an Australian-compatible plug lead.Ethernet cableFor the required initial router LAN connection.Protective packRenewed non-retail packaging rather than a factory-sealed retail carton.No camerasCompatible cameras, doorbells and sensors are separate products.No retail cartonThe original retail presentation box is not included.
A printed instruction manual and metal reset pin are included. HomeBase 2 has no expansion bay, so expansion-drive hardware does not apply.
Pairing protocol
Four steps for a compatible setup.
Confirm the models
Check every camera, doorbell or sensor model against current HomeBase 2 compatibility material. Ask CamGuard when a model is not explicit.
Power and Ethernet
Place the hub indoors with ventilation, connect the power adapter and use the included Ethernet cable to a router LAN port for setup.
Add and update
Add HomeBase 2 in the eufy app and install current firmware before pairing devices. E20/E10 sensor support needs v3.4.1.2 or later.
Pair and test
Add compatible products, create a test event and confirm live view, event storage, notifications and intended siren behaviour.
A successful hub setup does not make an undocumented product compatible. Keep the exact model numbers, firmware, placement and network conditions in the test record.
Laboratory enquiries
Short answers before ordering.
What does Manufacturer Renewed mean?
It means previously used stock that was refurbished and tested through eufy’s renewal programme. CamGuard Australia did not perform that work. Minor cosmetic marks and non-retail packaging are possible.
What exactly is included?
HomeBase 2 (T8010), power adapter with an Australian-compatible plug lead, Ethernet cable and renewed protective packaging.
Are the reset pin and printed guide included?
Yes. A printed instruction manual and metal reset pin are included.
Which products can pair with it?
Documented families include eufyCam 2, 2C, 2 Pro, 2C Pro and E40, plus supported battery doorbells and E20/E10 sensors under the stated firmware condition. Exact model compatibility controls; HomeBase 3-only and HomeBase Mini-only products are not made compatible by similar-looking hardware.
Does setup need Ethernet?
Yes. An initial router LAN connection is required. An Ethernet cable is included; keep a spare LAN port available.
Can I expand the 16GB storage?
The built-in eMMC is fixed and there is no SATA bay or microSD slot. USB expansion needs a check: eufy’s E40 comparison lists up to 256GB by USB, while older support pages say not expandable. Update the hub's firmware before pairing.
Does it record continuously?
No. It stores event recordings delivered by compatible products. It is not a continuous 24/7-recording NVR.
Can it be installed outdoors?
No. HomeBase 2 is an indoor hub. Keep it dry, powered and ventilated with suitable network access.
Who provides the warranty?
CamGuard Australia provides its own 12-month warranty for covered faults. It is not a manufacturer warranty, and Australian Consumer Law rights continue alongside it.
When will it be dispatched?
CamGuard’s typical handling target is same-day to 1 business day, although busy periods can take longer. Tracking follows after Australia Post receives the parcel.
What does postage cost?
Australia Post Express is included on orders of $99 or more after discounts. Under that threshold, tracked postage is $9.95 or Express is $12.95.
Is this a complete camera system?
No. This parcel contains the HomeBase 2 hub and listed accessories, not cameras. Compatible products are sold separately.
Check the exact model before pairing.
A sensible replacement or starting point for a deliberately compatible HomeBase 2 household, provided fixed 16GB event storage is exactly what you need.
Manufacturer Renewed · exact models first · fixed 16GB
Included with your order
1 × eufy HomeBase 2, Manufacturer Renewed
Power adapter
Ethernet cable
Printed instruction manual
Metal reset pin
Packaging may vary. Some renewed products arrive in plain protective packaging.
Shipping, warranty and returns.
Shipping
Australia Post Express included on orders of $99 or more after discounts. Under $99.00: $9.95 tracked or $12.95 Express. We do our best to get orders out the same day; same-day to 1 business day is our typical dispatch time from Townsville, Queensland; during busy periods it can extend, though that is rare.
Warranty
CamGuard Australia is an independent importer and reseller. Our own 12-month warranty applies · not a manufacturer warranty. Faulty or not as described inside that year and we cover the return postage. Your rights under Australian Consumer Law are additional.
Returns
Change of mind: 30 days from delivery, complete and unused, buyer pays return postage, original shipping not refunded. Faulty or not as described: we cover return postage.
Condition on this listing
Manufacturer Renewed. Previously used, renewed by the manufacturer, supplied in protective packaging, which may vary with some cosmetic marks possible on the housing.
Condition: Manufacturer Renewed. Previously used, renewed by the manufacturer, supplied in protective packaging, which may vary with some cosmetic marks possible on the housing. All refurbishment and testing on renewed stock is attributed to the manufacturer's renewal programme; we describe cosmetics and packaging only and do not test each unit individually. Compatibility: Wi-Fi: 2.4 GHz.
Specifications sourced from the manufacturer and believed accurate at time of listing; features and compatibility may be updated without notice.
Product specifications
Device capacity
Up to 16 cameras, plus 16 entry sensors, 15 motion sensors and 3 keypads
Local storage
16 GB eMMC (built in)
Expandable storage
Not expandable: 16 GB built-in storage only
Wi-Fi
2.4 GHz only
Setup help
Having trouble pairing devices? Try this: keep the HomeBase on the network cable to your modem and set the modem’s 2.4 GHz channel to 1, 6 or 11.
Wired connection
Ethernet. Connects to a LAN port on the router
Power
12 V DC 2 A power adapter (included)
Encryption
AES-128
In the box
HomeBase 2 (T8010), power adapter, Ethernet cable, quick start guide, metal reset pin
Color
White
Proof from real orders
Customer reviews
Product feedback and verified-buyer experiences collected by Judge.me.
5 stars: 1 (100%)
4 stars: 0 (0%)
3 stars: 0 (0%)
2 stars: 0 (0%)
1 star: 0 (0%)
A
Alex
Excellent Hombase 2 refurbished. Like new works excellent.
Would buy again.
Thankyou👍😊
Express Post
Express Post
FREE on $99+ orders
$12.95 below $99
