eufy S4 NVR PoE PTZ Add-On Camera | New No Box
Sale price
$328.00
Regular price $449.95
Skip to product information
eufy S4 NVR PoE PTZ Add-On Camera | New No Box
Sale price
$328.00
Regular price $449.95
Know before you buy
The quick decision check
- Condition
- New — no retail box
- Stock
- Currently unavailable
- System
- Wired PoE - NVR required
- Recording
- Records to the eufy PoE NVR S4 (3.5-inch SATA drive)
- What you need
- eufy NVR S4 recorder required
Compatibility: Wired PoE camera - it needs the eufy PoE NVR S4 recorder (sold separately) to record. No Wi-Fi, no microSD slot and no HomeBase pairing.
REGISTERED CABLER MAY BE REQUIRED Plug-in PoE patch leads are DIY. Fixed communications/security cabling in walls, ceilings or building cavities must be performed or supervised by an appropriately registered cabler.
What you need to install it
Read the customer reviews
- Install type
- Registered cabler may be required
- You’ll need
- A eufy PoE NVR S4 recorder (not included) and a PoE network run - Cat5e/Cat6 leads or installed cabling
- Tools
- Phillips screwdriver and a drill; cabling tools handled by your cabler if running in-wall
- Time
- Depends on the cable run (estimate)
Compatible extras
Complete your setup
Tick only what you need. Unavailable products are automatically left out.
This adds the product shown above and every selected extra in one step. Use the regular Add to cart button for the product on its own.
CamGuard AustraliaPlatform Zero: The Last Service to the Driveway
Melbourne after dark, except the replacement bus is a wide-plus-zoom PoE camera and it actually knows where it is going. This is the wired S4 add-on that watches the whole platform, then swings in for the close-up.
PLATFORM ZERO · NIGHT NETWORK
LAST SERVICE TO
THE DRIVEWAY.
A 4K fixed view and a 2K PTZ close-up share one body, one Ethernet run and one deeply judgemental departure board. It requires a compatible eufy NVR S4 and cannot work by itself.
ADD-ON CAMERA · EUFY NVR S4 REQUIRED
New and unused. The retail carton missed the train.
This camera has not been installed or used, and it ships in protective non-retail packaging with the mounting pieces listed below. It is not renewed stock.
New and unusedNo retail cartonNVR sold separately
SET PIECE 01 · PLATFORM INDICATOR
Four services. One of them is aggressively cancelled.
The board says three minutes. Melbourne translation: enough time to buy a coffee, miss the train and learn the next service has become a bus.
SET PIECE 02 · THE DEPARTURE BOARD
Every lane has a job. None of them says “standalone”.
The upper camera keeps the wide scene in view. When it detects a subject, the lower PTZ can lock on, frame and track. The compatible S4 NVR supplies power, recording and the system brain.
00:01WIDE VIEW4K · 122°ON TIME
00:02CLOSE-UP2K PTZ · 8×TRACKING
00:03POWER + DATAONE POE RUNBOARDING
—STANDALONE SERVICEDOES NOT EXISTCANCELLED
Replacement bus? No. Replacement NVR? Also no. Bring the actual eufy NVR S4 or this platform remains aggressively decorative.
SET PIECE 03 · CCTV, BUT MAKE IT PUBLIC TRANSPORT
Wide scene. Moving close-up. No Myki required.
The upper lens keeps the platform map; the PTZ handles the person doing something weird near the bins. Starlight colour night vision uses AI-ISP processing, with a spotlight available when the scene needs more light.
WIDEDETECTPTZRECORD
The fixed 4K camera does not abandon the whole scene just because the PTZ is following a subject.
Auto-framing keeps people or groups centred until they leave view.
PoE carries power and data to the NVR for dependable 24/7 recording.
Tap your ticket on the validator nobody asked for
BEEP. NEGATIVE BALANCE: one compatible eufy NVR S4.
The camera is an add-on, not a Wi-Fi camera, not the battery eufyCam S4 and not a tiny self-contained NVR wearing a trench coat.
SET PIECE 04 · NIGHT NETWORK CONTROL
The operating notes the announcer should have led with.
The documented operating route is a compatible eufy NVR S4/S4 Max, and the camera cannot operate standalone. eufy’s current Professional S1 list also includes T8E00; confirm current regional firmware and support before relying on S1.
SECRET PLATFORM NOTICE: The “express” service is stopping all stations, two emotional stages and a Macca’s car park.AI-ISP starlight colour night vision, HDR and an optional spotlight for extra scene light.
Fixed 4K overview hands subjects to the 2K PTZ for auto-framing, group tracking and up to 8× zoom.
The Bullet-PTZ Camera S4 is rated IP65. Seal cabling and connections appropriately for the install.
Unlike the station PA, these points are audible, specific and not being delivered from inside a metal bucket.
SET PIECE 05 · PLATFORM SAFETY LINE
Stand behind the yellow line—and in front of the compatibility facts.
A compatible eufy NVR S4, sold separately. This is the fifth reminder because returns are less fun than train replacement buses.
Use the Ethernet cable that ships with it where it suits the route, or plan a suitable Cat5e/Cat6 run from the camera to the compatible system.
Do not confuse it with the wireless battery-powered eufyCam S4. Similar name; very different ecosystem.
The Bullet-PTZ design uses two NVR channels. Check spare channel capacity before adding it.
The NVR warning has now appeared more often than “please touch on”, which is deliberate and considerably cheaper than returning the wrong camera.
SET PIECE 06 · INCLUDED · NIGHT-FREIGHT YARD
One camera wagon. Seven cargo crates. Four deliberate no-shows.
This New - No Box S4 kit-split camera keeps the complete boxed-version accessory set. The retail colour carton is the only part of that boxed camera package that missed the train.
Night-network timetable
Cameraeufy PoE Bullet-PTZ Camera S4 · T8E00121
Upper view4K fixed camera · 122°
Lower view2K PTZ · 360° pan · 8× auto-zoom
SystemCompatible eufy NVR S4 required
Power/dataPower over Ethernet
Weather ratingIP65
Recording24/7 through the compatible NVR
ConditionNew - No Box
No rail replacement bus, retail carton or mystery Wi-Fi mode is hiding under the seat. This is an add-on PoE camera: the compatible recording system remains a separate purchase.
Four-stop installation line
Confirm the exact eufy NVR S4 and two spare channels.
Plan and test the Ethernet run before drilling.
Mount the camera, weather-seal the cable path and connect PoE.
Add it in the NVR interface and tune zones, tracking and deterrence.
Passenger assistance that answers
Our own 12-month warranty: the 12-month warranty comes from CamGuard Australia and is handled by us; it is not a manufacturer warranty. Your Australian Consumer Law rights apply as well.
Change of mind: return within 30 days of delivery in the required condition. Buyer pays return postage and original shipping is not refunded. Faulty or incorrectly described items are handled under our warranty and ACL obligations.
If the cable plan begins with “we’ll figure it out in the roof”, congratulations: you are now running Melbourne transport planning.
EXPRESS SERVICE: Our typical dispatch from Townsville is same-day to 1 business day; during busy periods it can take longer.
Postage: Australia Post Express is included on orders over $99.00. Under that threshold, tracked postage is $9.95 or $12.95 for the Express upgrade.
Your parcel gets a tracking number. The 11:43pm replacement bus gets a rumour.
SET PIECE 08 · Platform announcements in plain English
For once, the important announcement is not arriving exactly as a V/Line diesel passes.
Is the condition exactly as stated?
Yes. This listing is New - No Box. The condition section above explains the packaging and cosmetic expectations that apply to this exact stock.
Is anything else required?
The documented route is a compatible eufy NVR S4/S4 Max, sold separately, with two free channels for this Bullet-PTZ add-on. There is no standalone mode. eufy’s current Professional S1 list also includes T8E00; confirm regional firmware and support before choosing S1.
When will CamGuard Australia dispatch it?
We aim to dispatch same-day to 1 business day. Busy periods can extend that window, and tracking is sent once the parcel is moving.
Who provides the warranty?
CamGuard Australia provides our own 12-month warranty. It is not a manufacturer warranty and it sits alongside Australian Consumer Law rights.
The last service is wired.
New, unused S4 PoE add-on camera without the retail carton. Wide 4K plus 2K PTZ coverage, NVR recording and a platform announcer who has now said “NVR required” six times.
CamGuard Australia · Townsville QLDProduct specifications
- Pan and tilt range
- Bullet 10°-40°; PTZ 360° horizontal, 0-70° vertical
- Zoom
- 8× Hybrid Zoom
- Frame rate
- Bullet 20FPS / PTZ 20FPS
- Night vision
- Starlight / Spotlight / Infrared
- Using a third-party PoE switch
- PoE switch must comply with the IEEE 802.3at/af standard, providing a maximum of 30W per port
- Wired connection
- PoE port — the NVR provides network connectivity and power to the camera via the PoE port
- Recording mode
- 24/7 recording over PoE — a single cable handles power and data
- AI detection
- Person / Car / Pet / Stranger
- Auto-tracking range
- PTZ locks on and auto-tracks subjects in centred close-ups from up to 164 ft away
- Weather resistance
- IP65
- Siren
- Smart sirens and a red and blue strobe
- Two-way audio
- Two-way talk with AI noise reduction
- Installation
- Ceiling or wall mount at a height of 2 m to 3 m (7 ft to 10 ft)
- Dimensions
- 164×147×92 mm
- Not included
- PoE NVR, switch, injector, and DC adapter required (not included)
- Resolution
- Bullet 4K, PTZ 2K + 2K
- Field of view
- 360° PTZ / 122° FOV
- NVR channel usage
- The NVR supports up to 16 channels. The Bullet-PTZ camera occupies 2 real-time streams, and up to 8 Bullet-PTZ cameras can be connected.
- Color
-
- White
- Power source
-
- Power over Ethernet (PoE)
- Connection method
-
- Wired
- Connectivity technology
-
- Ethernet
- Camera features
-
- Built-in speakers
- Digital zoom
- Waterproof
- Surveillance camera design
-
- Bullet
- PTZ
- Surveillance camera mounting type
-
- Ceiling
- Wall
Proof from real orders
Customer reviews
Product feedback and verified-buyer experiences collected by Judge.me.