eufy Genuine T8703 2.6W Solar Panel (Micro-USB Version) - New No Box
Condition New No Box
Included items: Read this listing's contents before choosing accessories. A condition grade alone does not tell you which parts or packaging are included.
Compatibility: Original eufy solar-charger family supports eufyCam, eufyCam E, 2, 2 Pro, 2C and 2C Pro. This Micro-USB stock has no retail camera adapters; exact port-recess and water-seal fit must be confirmed. No direct USB-C fit. Does not change camera HomeBase or recording requirements.
No USB-C-to-Micro-USB adapter or retail 4-camera-adapter set is supplied. Do not force the connector or leave a poor seal exposed. Solar charging does not enable 24/7 recording.
Check each listing for the exact model pairing and included parts. Unavailable options are left out.
This adds the product shown above and every selected extra in one step. Use the regular Add to cart button for the product on its own.
SUNLIGHT ACCOUNTS · T8703
Micro-USB edition · New No Box
A solar panel turns daylight into camera charging, so we've given it the paperwork of a very unusual electricity account.
eufy Genuine T8703 2.6W Solar Panel
Micro-USB Version · New No Box
Let a sunny spot do some of the charging work for your compatible eufy camera. This version has a permanently attached 2 m cable and a water-sealed Micro-USB plug.
This exact offerNew and unused, without the retail box. The retail set's 4 camera adapters and USB-C-to-Micro-USB adapter are not included. Camera compatibility and a correctly seated seal matter.
The sun has declined to create a customer portal.
2.6 W rated output, supplied by daylight. The camera keeps the battery; the panel helps replenish it.
Think fewer manual top-ups when the position and conditions are suitable. Solar output changes with sunlight, shading and the camera's workload.
Accounts requested a guaranteed daily figure. The clouds declined.
5 V · 520 mA maximum
Decorative meter. No meter reader required.
The attached cable on this stock measures 2 m. It is built in and non-removable.
Plan the actual routed distance, including bends and a little slack. The cable does not take shortcuts through the wall.
Some eufy retail pages describe a 4 m cable. That is not the cable supplied with this offer. CamGuard Australia's measurement of this stock is the length used here.
Same model number does not mean identical cable or retail contents. This listing describes the physical Micro-USB version supplied. Its lead cannot be unplugged from the panel or exchanged for a longer one.
The amendment has saved two metres of disappointment.
MICRO-USB
Built into the attached lead, with a water-sealed plug connector.
Connector symbol is illustrative, not a scale drawing of the seal.
NO USB-C CONVERSION IN THE PARCELThere is no USB-C-to-Micro-USB adapter because this cable already ends in Micro-USB.
The retail camera adapters are separate fitting pieces. Their absence still matters: the plug must fit the exact camera's port recess and seal correctly. A shared USB connector alone does not establish weather-sealed compatibility.
Accounts calls it an adapter saving. Installation calls it the correct plug.
New No Box means new and unused. It is not manufacturer renewed and is not supplied in factory-sealed retail packaging.
Condition and contents are separateThis offer specifically excludes the retail camera adapters and the USB-C conversion adapter. The contents statement below describes this stock, rather than reproducing a retail-box list.
The cardboard account has been closed. The product is still new.
Genuine eufy T8703 solar panel, New No Box.
Built-in, non-removable 2 m charging cable, attached to the panel.
Water-sealed Micro-USB plug at the camera end of that cable.
Adjustable mounting bracket.
Mounting screws.
Wall plugs / anchors.
The lead and plug belong to the panel. They are not three separate solar panels in a trench coat.
Please do not inventory the sunshine. It arrives separately.
Choose direct sun. Give the panel the sunny position, while the camera keeps a useful view.
Keep the face clear. Dirt, leaves and shadows are uninvited members of the supply chain.
Watch the battery trend. Cloudy periods and busy cameras may still call for a manual top-up.
A passing cloud has requested flexible working arrangements.
Monocrystalline silicon cells, an ETFE surface film and an IP65-rated panel housing.
Correct installation still matters. Keep the plug fully seated, the seal undamaged and the mounting secure. IP65 is an outdoor-resistance rating, not permission to submerge the panel or leave a connector exposed.
The panel has outdoor work. The camera still needs the right paperwork at the port.
eufy's original solar-charger family supports several Micro-USB cameras. This reduced-accessory offer requires a fit and seal check for the exact camera.
Existing camera system still requiredThe panel supplies charging power. It does not replace a camera's required HomeBase, change storage options or add recording features. Cameras record and detect; they do not prevent incidents.
Electrical and material specifications follow eufy's original solar-charger documentation. The 2 m cable, fixed Micro-USB plug, condition and accessory exclusions describe this stock specifically.
The ledger contains no estimated bonus cable.
Match the camera model, its solar-charging support and the shape of its port recess. Establish that the fitted plug seals correctly before mounting anything. The drill can wait for the introduction.
Choose useful direct sunlight within the actual 2 m routed lead length. Allow slack at the connection. In Australia, a north-facing position is a useful starting point; consider shadows through the day.
Use the included adjustable bracket, with screws and wall plugs appropriate for your mounting surface. Angle the panel towards the sun, fully seat the Micro-USB plug and make sure its weather seal fits correctly. A wall is not a cable anchor.
Update the camera and app, then follow the camera's Power Manager or Power Source settings to select Solar Panel where available. Review its battery level over several days and adjust the position if needed.
Installation Desk has approved the sunshine. The shade needs another appointment.
Some retail descriptions refer to a four-metre cable and a larger accessory set. The stock in this offer has a measured two-metre lead, permanently attached to the panel. We describe the supplied version, including its Micro-USB plug, rather than transferring every detail from a different retail package. The extra metres have not gone missing in transit.
This is New No Box stock: new and unused, without the original retail carton. It is not a manufacturer-renewed grade. The separate contents statement explains the adapter exclusions, which should be considered alongside the condition. Our own twelve-month in-house warranty applies in addition to your rights under Australian Consumer Law.
The retail set's four camera adapters are not part of this offer. A USB-C-to-Micro-USB converter is also absent because the attached lead already has a Micro-USB plug. That built-in connector has a water seal, but its fit still needs to match the exact camera. Please confirm the model and sealing arrangement before ordering.
The panel can reduce manual recharging when there is enough suitable direct sunlight. It cannot guarantee that charging will always keep pace with the camera. Weather, shade, panel cleanliness, temperature and camera activity all matter. Keep an eye on the battery trend and retain a way to recharge manually when needed. Retirement approval remains with the weather.
No. The panel is a charging accessory, not a camera upgrade. It does not add continuous recording, change the camera's resolution, provide storage or remove a HomeBase requirement. Your existing camera model and its supported settings still determine how it records. One panel is intended for one compatible camera, without splitting the cable.
We do our best to dispatch orders the same day. Same-day to one business day is typical, but busy periods can occasionally extend that, although this is rare. Dispatch is separate from the carrier's delivery time. The shipping prices and return conditions for this Shopify order are visible immediately below, without opening another letter.
Australia Post Express is included on orders over $99.00. For orders under $99.00, tracked shipping is $9.95 or Express is $12.95. The applicable shipping charge is shown at checkout.
We dispatch from Townsville, Queensland, and do our best to get orders out the same day. Same-day to one business day is our typical dispatch time. During busy periods it can extend, though that is rare. Delivery time is separate from dispatch time.
Change-of-mind returns are accepted within 30 days of delivery, complete, unused and in resaleable condition. Please contact us before returning the item. You pay return postage, and original shipping is not refunded.
These change-of-mind terms do not limit your rights for faulty goods, goods not as described or transit damage. CamGuard Australia covers reasonable return postage for faulty or not-as-described items.
CamGuard Australia provides our own 12-month in-house warranty. This is not a manufacturer warranty. It operates in addition to your rights and remedies under Australian Consumer Law, which are not excluded or restricted.
CamGuard Australia is an independent Australian reseller of genuine stock, based in Townsville, Queensland. We are not an authorised supplier, distributor or representative of eufy or Anker Innovations. ABN 62 385 894 763.
Product feedback and verified-buyer experiences collected by Judge.me.
