The reader sits in the exterior lever. Enrol up to 50 fingerprints.
eufy Smart Lock C32
Condition Brand New
RRP, brand new: $179.95 checked 08.10.2026
See what works with it and what it needs, with one kit total.
The quick decision check
- Condition
- Brand New
- Stock
- Available now
- Delivery · Australia Post
-
Express Post FREE on $99+ orders $12.95 below $99
Standard $9.95 below $99 Order total after discounts. Delivery estimates & policy
- System
- Standalone - Wi-Fi smart lock
- Recording mode
- Event alerts
- Power
- Battery
Compatibility: Works over Wi-Fi with the eufy app - no HomeBase involved.
Choose compatible extras Choose only what your setup needs
Use the regular Add to cart button for this product on its own. Check the setup requirements above and each extra's listing for included parts and firmware requirements.
This adds the product shown above and every selected extra in one step. Use the regular Add to cart button for the product on its own.
Choose your viewThe essentials or the full story. Switch any time.
eufy Smart Lock C32 · T85L1111 · Brand New
Touch. Press.
You’re in.
- No hub needed. It joins your 2.4 GHz Wi-Fi and the eufy app, and works with Alexa and Google Assistant. Not Apple Home, Matter or IFTTT; no HomeBase pairs with it. Check your devices ›
- Why the C32: fingerprint and keypad built into one oversized lever, for a study, bedroom or storeroom door. Indoor doors only.
- Brand New: factory-sealed in its full retail carton, unopened and unused.
- 12-month CamGuard warranty · dispatched from Townsville · free Express on $99+ orders after discounts
Where it goes
Inside doors only.
eufy rates it IP53, and still lists it for indoor use only. We go with eufy.
Made for the rooms inside

- A study, home office, bedroom or wardrobe room.
- An internal storeroom.
- Left- or right-handed doors: press the handle down to open.
- Wood or metal, inside eufy’s measurements.
Not for the door outside

- A front door, or any door exposed to rain or without overhead cover.
- A storm door on a front entrance.
- A second lock close by. eufy recommends doors with a single lock hole.
How it connects
Nothing in between.
Lock to router, router to phone.
- The leverFingerprint, code or key, right at the door.
- Your Wi-Fi2.4 GHz. A 5 GHz-only network won’t do.
- eufy appManage users, read the log, unlock from your phone.
- Alexa or GoogleVoice, if you use it.
✕HomeBaseNot needed, and none pairs with it: not HomeBase 2, 3, Mini or the Professional S1.
Ways in
Fifty fingers. A hundred codes.
Room on one lever for the whole household.
50 fingerprints
Enrolled on the reader beside the rose.
100 passcodes
Tapped on the keypad along the handle.
0.3 s to read a finger
eufy’s recognition figure under its test conditions, not the whole unlock.
4 AA, included
eufy rates them at up to 5 months at 20 unlocks a day. Use, Wi-Fi signal and temperature change that.
Batteries low? It alerts you below 20%. Run flat anyway? A portable charger in the outside USB-C port gives temporary power to unlock, or use the key. That port doesn’t recharge the AAs.
Door fit
Out with the tape measure.
Three numbers from eufy, for a standard pre-bored door. Measure yours before you order.
Bore hole
2 1/8 in across.
Backset, mm
2 3/8 or 2 3/4 in.
Door thickness, mm
1 3/8 to 2 1/6 in.
The rose is 70 mm across and the handle 163.9 mm long, so make sure it clears anything nearby. Fitting takes about 15 minutes with a screwdriver.

Works with
Tick your gear.
Against eufy’s list for the C32.
Your home
Showing everything. of work with the C32
-
✓
2.4 GHz Wi-Fi. The lock joins it directly.
-
✓
Amazon Alexa. Works with it.
-
✓
Google Home and Assistant. Works with it.
-
✕
5 GHz-only Wi-Fi. Not compatible: it needs 2.4 GHz.
-
✕
Apple Home (HomeKit). Not compatible, eufy says.
-
✕
Matter. Not compatible.
-
✕
IFTTT. Not compatible.
-
✕
HomeBase 3. Doesn’t pair with the C32.
-
✕
HomeBase Mini. Doesn’t pair with the C32.
-
✕
HomeBase 2. Doesn’t pair with the C32.
-
✕
HomeBase Professional S1. Doesn’t pair; it isn’t on eufy’s S1 list.
No hub needed: the C32 runs on your Wi-Fi and the eufy app alone.
Not listed? Check your devices ›
Condition · Brand New
Never opened, never fitted.
Brand New means factory-sealed stock in its full original retail carton, unopened and unused. We don’t open sealed cartons: what we tell you comes from the packaging and eufy’s published specs.
In the carton
- The C32: outside lever with reader and keypad, inside lever
- Adjustable latch and strike plate
- Spindle and installation screws
- Physical backup keys
- 4 AA batteries
- Quick Start Guide and safety card
Not in it
- A screwdriver
- A USB-C power adapter (that port is for emergency power only)
- A HomeBase (not needed)
Good to know.
Can I fit it to my front door?
No. eufy lists it for indoor use only: not front doors, and not doors exposed to rain or without overhead cover. The IP53 rating doesn’t change that.
Do I need a HomeBase?
No. It connects straight to your 2.4 GHz Wi-Fi and the eufy app, and no HomeBase pairs with it.
Will the app tell me every time the door opens?
Not every time. eufy notes that opening with the inside handle or the physical key doesn’t send a notification.
When will my order leave Townsville?
We do our best to get orders out the same day; same day to 1 business day is our typical dispatch time from Townsville, Queensland. During busy periods it can take a little longer, though that’s rare. Australia Post delivery time is on top.
Buying from CamGuard Australia
Sent from Townsville.
Shipping
Australia Post Express is included on orders of $99 or more after discounts. Under $99.00 it’s $9.95 tracked, or $12.95 Express.
We aim to dispatch the same day; same day to 1 business day is typical from Townsville, Queensland. During busy periods it can take a little longer, though that’s rare.
Warranty
Our own 12-month warranty, not a manufacturer warranty, with Australian Consumer Law rights on top. Faulty or not as described? We cover the return postage.
Returns
Change of mind within 30 days of delivery, complete and unused. You pay the return postage; the original shipping isn’t refunded.
Who you’re buying from: an independent Australian importer in Townsville, happy to answer questions before you buy.
Tech specs.
Lock
- Model
- eufy Smart Lock C32 (T85L1111), Brand New
- Ways in
- Fingerprint, eufy app; backups: passcode, physical key
- Capacity
- 50 fingerprints, 100 passcodes
- Fingerprint
- 0.3 s recognition (eufy’s test conditions)
- Hardware grade
- No ANSI/BHMA grade published for this model
Connection
- Wi-Fi
- Built in, 2.4 GHz only
- Hub
- None needed; no HomeBase pairs with it
- Voice
- Amazon Alexa, Google Assistant
- Not compatible
- Apple HomeKit, Matter, IFTTT
Power
- Batteries
- 4 AA, included
- Battery life
- Up to 5 months at 20 unlocks a day (eufy’s rating); varies with use and conditions
- Emergency power
- Outside USB-C port for a portable charger; doesn’t recharge the batteries
Door
- Use
- Indoor doors only
- Bore hole
- 54 mm (2 1/8 in)
- Backset
- 60 or 70 mm
- Thickness
- 35 to 55 mm
- Handle
- 70 mm rose, 163.9 mm long; left- or right-handed doors
- Weather rating
- IP53
- Fitting
- About 15 minutes with a screwdriver
Compatibility follows eufy’s most recent published information. Where eufy’s documents disagree, we follow the most recent one, and where eufy hasn’t confirmed a pairing we mark it not compatible until it does.
The C32 controls who opens a suitable indoor door; it doesn’t prevent every unwanted entry, and fingerprint reading can vary with conditions.
Product images are official eufy images. Illustrations and diagrams are labelled.
Our own 12-month warranty applies, not a manufacturer warranty. Nothing here limits your rights under Australian Consumer Law.
CamGuard Australia is an independent importer and reseller, not an official or authorised supplier, distributor or representative of eufy, Anker Innovations or their affiliates. Product names and trademarks belong to their owners.
Details believed accurate at time of listing.
CamGuard Australia · ABN 62 385 894 763 · Townsville, Queensland
Relief key retained

This workplace farewell suits the C32 because fingerprint, code and app take regular shifts while the physical key keeps emergency relief duty.
The supplied physical key stays on the roster as a backup entry method.
Playful generated artwork · model representation, not a photograph of the individual factory-sealed retail pack.
Factory-sealed in full retail packaging
This C32 is Brand New: factory-sealed stock in its full original retail package. CamGuard Australia does not open the sealed unit for an individual inspection or test.
Published images identify the C32 model. The unopened original retail pack is Brand New, not Open Box.
Three regular shifts, one relief worker
Create up to 100 codes for authorised household users.
Manage access through direct 2.4GHz Wi-Fi.
Keep the conventional backup somewhere known and retrievable.
The controls belong to the lever


Capacity for a busy roster
The C32 supports up to 50 fingerprints and 100 passcodes. Remove access when it is no longer required.
eufy publishes a 0.3-second fingerprint recognition figure under its test conditions. Actual response can vary with enrolment, finger placement and conditions, so it is a performance reference rather than a timesheet guarantee.
No HomeBase induction
The C32 connects directly to 2.4GHz Wi-Fi. No HomeBase and no separate bridge are required. Bluetooth supports setup and reset, then is inactive during normal operation.
Confirm usable 2.4GHz signal at the intended doorway. A dual-band router may provide both bands, but the C32 needs 2.4GHz. Check signal at the intended door.
Essential fitment criteria
Supported latch backsets: 2 3/8 in and 2 3/4 in.
Main cross-bore: 2 1/8 in. Measure existing preparation.
Door thickness: 1 3/8 in to eufy's stated 2 1/6 in.
Suitable wood or metal can work inside those limits. A screwdriver is required and not included. Measure the actual door.
Indoor team placement
The C32 is for a compatible bedroom, study, home office, internal storeroom or similar indoor door. eufy does not recommend this model for a front door or a door exposed to rain.
The published IP53 specification does not create an exterior vacancy. The C32 manages access to a suitable internal room. It does not make an unsuitable door suitable or prevent every unwanted entry. Choose a suitable internal door.
Four AAs on the payroll
eufy's battery estimate is more than five months based on 20 unlocks per day, with actual life varying by use, network quality and environment. The lock raises a low-battery warning below 20%.
If the cells are depleted, the exterior USB-C input can provide temporary emergency power from a suitable source. It does not charge the AA batteries. The physical key is another backup entry route.
Inside the sealed welcome pack
Exterior keypad lever, interior lever assembly, adjustable latch and strike plate.
Spindle, interior screw, installation screws and optional plastic separator.
Physical keys and four AA batteries.
Quick Start Guide and Safety Card.
Screwdriver, HomeBase and separate Wi-Fi bridge.
One C32 single-lock set, model T85L1111, factory-sealed in full original retail packaging.
This role is not for you if...
Four setup steps
Confirm indoor placement, bore, backset and door thickness before removing the old lever.
Fit latch, exterior assembly, spindle and interior assembly using the supplied guide.
Insert four AA batteries and place the physical backup key somewhere deliberate.
Add the lock in the eufy app, join 2.4GHz Wi-Fi and create authorised access.
The C32 file
Common questions
What does Brand New mean in this role?
It means factory-sealed stock in full original retail packaging. CamGuard Australia does not open the sealed pack to inspect or test the individual unit. Published imagery identifies the C32 model, and the unopened original pack preserves its Brand New condition.
Can the C32 transfer to a front-door role?
No. eufy's guidance specifies indoor use and says the C32 is not recommended for a front door or a rain-exposed door. IP53 does not override that direction. Its suitable workplace is a compatible bedroom, study, office or other internal room.
Does it need HomeBase induction?
No HomeBase or separate bridge is required. The C32 connects directly to 2.4GHz Wi-Fi, and Bluetooth supports setup and reset. Check the intended doorway for coverage before fitting the lock;
What happens when the batteries clock off?
The exterior USB-C input accepts temporary emergency power from a suitable source so the lock can wake for authentication. It does not charge the AA cells. A physical key is also supplied as a conventional backup and should be stored somewhere known.
Which smart-home teams are supported?
Amazon Alexa and Google Assistant are supported in eufy's current C32 information. Apple HomeKit, Matter and IFTTT are not. If one of those platforms is mandatory, choose another model.
When will CamGuard Australia dispatch?
We make a best effort to dispatch on the same day. Same-day to 1 business day is our typical handling time, and busy periods can extend that, though it is rare. Australia Post timing then applies. Confirm fitment before ordering.
Shipping, warranty and returns.
Shipping
Australia Post Express included on orders of $99 or more after discounts. Under $99.00: $9.95 tracked or $12.95 Express. We do our best to get orders out the same day; same-day to 1 business day is our typical dispatch time from Townsville, Queensland; during busy periods it can extend, though that is rare.
Warranty
CamGuard Australia is an independent importer and reseller. Our own 12-month warranty applies · not a manufacturer warranty. Faulty or not as described inside that year and we cover the return postage. Your rights under Australian Consumer Law are additional.
Returns
Change of mind: 30 days from delivery, complete and unused, buyer pays return postage, original shipping not refunded. Faulty or not as described: we cover return postage.
Condition on this listing
Brand New. Factory-sealed in full original retail packaging, unopened and unused.
© 2026 CamGuard Australia · ABN 62 385 894 763 · Townsville, QLD. Independent Australian reseller of eufy cameras, doorbells and locks; not an official or authorised supplier of eufy, Anker Innovations or their affiliates. Trademarks belong to their respective owners.
Condition: Brand New. Factory-sealed in full original retail packaging, unopened and unused. We describe packaging and the published spec sheet only and do not open or test each unit individually. Compatibility: Smart Lock C32 (T85L1111): built-in 2.4 GHz Wi-Fi, no HomeBase required; fingerprint, app, code and physical key; indoor usage scenario per eufy; IP53; no Apple Home, Matter or IFTTT. Battery life about five months on eufy’s published rating at 20 unlocks a day; actual endurance varies with use and conditions.
The Fun view's "The Key's Long-Service Leave Party" is a fictional office-HR framing for this listing · the staff, memos and personnel files are invented, not real people or a real workplace. Specifications sourced from the manufacturer and believed accurate at time of listing; features and compatibility may be updated without notice.
Product specifications
- Unlocking methods
- Fingerprint and app; backup unlocking by passcode and physical key
- Lock type
- Latch/lever handle lock for interior doors. eufy does not recommend it for front doors
- Door thickness
- Fits doors 35–55 mm thick (1 3/8 in – 2 1/6 in)
- Backset
- 60 mm or 70 mm backset (2 3/8 in or 2 3/4 in); bore hole diameter 2 1/8 in (54 mm)
- Power
- 4 × AA batteries (included)
- Battery life
- Over five months, based on unlocking 20 times per day; actual performance may vary
- Wi-Fi
- 2.4 GHz only, built-in module, no bridge required
- Setup help
- Having trouble connecting? Try this: set your modem’s 2.4 GHz channel to 1, 6 or 11, and if it shows one Wi-Fi name for both bands, split them.
- Weather resistance
- IP53 (dust-protected, protected against spraying water)
- User capacity
- Up to 50 fingerprints and 100 passcodes
- Smart home support
- Alexa and Google Home; not compatible with Apple HomeKit, IFTTT or Matter
- In the box
- Latch, Latch Screws, Strike Plate, Strike Plate Screws, Plastic Separator (Optional), Exterior Keypad, Spindle, Interior Assembly, AA Batteries, Screw, Rubber Plug (pre-installed in the interior assembly), Keys, Safety Card, Quick Start Guide
Customer reviews
Product feedback and verified-buyer experiences collected by Judge.me.