eufy Security HomeBase 2 | Manufacturer Renewed (Excellent Condition)
The grey box that quietly runs everything.
A HomeBase is the meter box of a eufy camera system. It lives on a shelf, it collects dust, it never gets a compliment — and without it, the eufyCam bolted to your carport is a very expensive paperweight. This is that box, renewed by the manufacturer, in excellent nick.
Manufacturer Renewed — Excellent. This unit was previously used, then refurbished and tested through the manufacturer's own renewal programme. Excellent grade means near-new: light handling marks are possible, nothing you'd notice from a metre away. It arrives in plain renewed (non-retail) packaging.
BOX
No. 2
Six switches, all verified
Every figure below is taken from the manufacturer's own product pages and support articles. Nothing here is guessed, rounded up or borrowed from a similar model.
What the box actually does all day
Four runs off the one board. None of them ask you for a subscription to keep working.
Footage lands here, not in somebody else's data centre
The HomeBase 2 holds 16 GB of local storage on board, and the manufacturer lists it as expandable to 256 GB with a USB drive. Recording to that local storage costs you nothing per month — there's no plan to keep alive, no card to re-enter every year. It's the same deal as the meter box: it just sits there doing its job.
One board, up to sixteen cameras
The manufacturer's support notes put the ceiling at 16 cameras on a single HomeBase 2. For the overwhelming majority of Australian houses that is more than the number of walls worth pointing a camera at. Add-on eufyCams — the ones sold without a hub — talk to the base rather than to your router, which is exactly why they need one of these to work at all.
There's a siren in the box itself
The hub has its own built-in siren, and it's what the manufacturer's Entry Sensor and Motion Sensor trigger when the alarm is armed and something opens that shouldn't. Whether you use it is entirely up to you — plenty of people never arm it and just want the recordings. It's the mains switch of the setup: there, ready, mostly left alone.
The Apple Home circuit that only runs off this base
This is the part people miss. The manufacturer states that eufyCam 2, 2 Pro, 2C and 2C Pro support Apple HomeKit and must be connected to a HomeBase 2 for it. If you own those cameras and you want them in the Apple Home app, this is the hub that does it — not the newer one. That single line is the whole reason the HomeBase 2 is still worth owning in 2026.
Everyone remembers the camera. Nobody remembers the box. The box is the reason the camera remembers anything.
- It was used before you. This is a Manufacturer Renewed unit — previously owned, then refurbished and tested through the manufacturer's own renewal programme. Excellent grade: near-new, with light handling marks possible.
- Renewed packaging, not retail. Plain protective box. No glossy sleeve, no shrink wrap, no branded insert. If the box matters to you, this is not the listing for you.
- It's the older generation. The HomeBase 2 has no on-device AI — no face recognition, no cross-camera tracking, no 24/7 continuous recording. That's the S380 / HomeBase 3, which we list separately.
- The expansion is a USB drive, not a hard drive bay. The manufacturer lists 16 GB built in, expandable to 256 GB via USB. If you want terabytes, you want the HomeBase 3.
- Cosmetics matter less here than on any other product we sell. A hub lives behind the TV or on a shelf in the hallway. Once it's plugged in you will genuinely never look at it again — which is the honest argument for buying a renewed one.
- Compatibility is the real risk, not condition. Newer eufy cameras do not pair with this hub. Check the next section properly before you buy — it is the single most common reason people return a base station.
Certificate of how we actually operate
A small Australian business in Townsville. One person packs your parcel. No call centre, no script, no offshore ticket queue.
Genuine eufy stock
We are an independent reseller of genuine eufy Security product. Not a grey clone, not a look-alike.
12-month CamGuard warranty
Our own in-house warranty — not a manufacturer warranty — on top of your Australian Consumer Law rights.
Condition stated plainly
Renewed is written in the title, the hero, the honest bit and the FAQ. You should not be able to miss it.
Specs from the source
Every figure on this page was checked against the manufacturer's own product pages and support articles.
Out the door quickly
Dispatched within 1 business day from Townsville, Queensland. Australia Post Express included on every order over $99.00.
A real person replies
Message us before you buy if you're unsure which cameras you own. We would much rather answer than process a return.
Excellent
The ratings plate
Specifications are manufacturer-stated and were checked against the manufacturer's own product pages and support articles at the time of writing. Where the manufacturer publishes two different figures for the same thing, we have left it off this plate rather than pick the flattering one.
Which circuits are ON, which are OFF
This is the section that decides whether this hub is right for you. The lists below come from the manufacturer's own device-compatibility table for HomeBase 2. If your camera is not on the ON list, do not assume — ask us first.
Listed as compatible
- eufyCam (original) and eufyCam E
- eufyCam 2 and eufyCam 2 Pro
- eufyCam 2C and eufyCam 2C Pro
- eufyCam E40 — the manufacturer states the add-on camera requires a HomeBase 2 or an S380 to operate
- Video Doorbell 2K (battery) add-on
- Video Doorbell Dual add-on
- 1080p Battery Doorbell · Battery Doorbell Slim
- Entry Sensor · Motion Sensor · Keypad
- SoloCam E30 — the one SoloCam on the HomeBase 2 table
- eufy SmartDrop
Listed as not compatible
- eufyCam 3 (S330) — listed "No"
- eufyCam 3C (S300) — listed "No"
- eufyCam S4 — listed "No"
- SoloCams generally — listed "No", with the SoloCam E30 the single exception
- Smart Lock Front Door · Smart Lock Touch — listed "No"
- eufyCam S3 Pro — it appears only on the HomeBase 3 compatibility list, not the HomeBase 2 one
Check before you commit
- Newer-generation E20-series sensors — the HomeBase 2 table names the Entry Sensor, Motion Sensor and Keypad. Confirm your exact sensor model against the manufacturer's current page.
- Wired video doorbells — not on the HomeBase 2 table. Check the model code on your doorbell first.
- Floodlight cameras, indoor cameras and locks not named in the ON column — treat as unconfirmed until checked.
- Anything bought in the last two years — the newer the camera, the more likely it belongs on the HomeBase 3.
If your cameras are the newer S330, S3 Pro, S4 or a SoloCam, you want the eufy HomeBase 3 (S380) instead — we list one in Manufacturer Renewed, Good condition as a separate item. Same theme, different box, much bigger brain.
Honestly — is this yours or isn't it?
Probably not for you if…
- Your cameras are S330, S3 Pro, S4, or any SoloCam other than the E30 — they will not pair.
- You want face recognition, cross-camera tracking or 24/7 continuous recording. This model has none of it.
- You want terabytes of local storage on a proper hard drive.
- You need a sealed retail box — renewed stock ships in plain packaging.
- You want a manufacturer warranty specifically. Ours is an in-house CamGuard warranty.
- You expect a factory-fresh finish with zero handling marks anywhere.
Perfect for you if…
- You own eufyCam 2, 2 Pro, 2C or 2C Pro add-on cameras sitting useless in a drawer.
- Your old HomeBase 2 died, got water in it, or went with the ex.
- You want those 2-series cameras in Apple Home — this is the hub that enables it.
- You're adding a second base to a bigger property and don't want to pay new-hub money.
- You'd rather spend the difference on another camera than on a box that lives in a cupboard.
- You genuinely do not care what the hub looks like, because you will never look at it.
Four steps and the board is live
No electrician required, no drilling, no 240-volt anything. It's a plug and two cables.
Isolate and site it
Pick a central indoor spot — a shelf, a cupboard, beside the router. Central beats hidden: the cameras talk to the base, not to your Wi-Fi.
Connect the supply
Power in, Ethernet to the router. The manufacturer recommends the wired connection first; you can switch it to Wi-Fi later in the app if you'd rather.
Energise the app
Add the HomeBase in the eufy Security app, let it pull the current firmware, then pair your cameras and sensors to it one at a time.
Test and label
Walk past each camera, check the clip lands, then set your arming schedule. Optional but recommended: a bit of texta on the shelf edge saying what it is.
What's in the box — and what isn't
If anything listed above is missing when your parcel lands, message us the day it arrives and we'll sort it — no argument, no form to fill in.
Australia Post Express included on every order over $99.00
Dispatched within 1 business day from Townsville, Queensland. Tracking appears on your order once the parcel is scanned into the network.
12-month in-house CamGuard Australia warranty
This is our own warranty, not a manufacturer warranty. It sits on top of — and does not replace or limit — your rights under the Australian Consumer Law. If the unit is faulty or not as described within those 12 months, CamGuard covers the return postage.
30 days to change your mind
Return it within 30 days in the condition it arrived. The buyer pays the return postage, and the original shipping cost is not refunded. Faulty is handled under Item 02, not here.
Ask us about compatibility first
Send the model number printed on your camera and we'll tell you whether this hub runs it. A two-minute message saves a fortnight of posting boxes back and forth.
It means the unit was previously used, and was then refurbished and tested through the manufacturer's own renewal programme before it reached us. It is not new, and we do not describe it as new. Excellent grade means near-new condition with light handling marks possible.
Excellent grade is the top renewed grade — near-new, with light handling marks possible. And realistically: a hub sits behind the TV or in a cupboard for years at a time. Cosmetic wear matters less on this product than on almost anything else we sell.
Only if they're on the ON list above. The 2-series eufyCams (2, 2 Pro, 2C, 2C Pro), the original eufyCam and eufyCam E, the E40, the battery doorbells, the sensors and the SoloCam E30 are listed as compatible. The S330, S3 Pro, S4 and other SoloCams are not. If you're unsure, message us the model number before you buy.
Not to record locally. Footage goes to the hub's own storage. There is no ongoing fee required for that.
The manufacturer lists the HomeBase 2 as 16 GB built in, expandable to 256 GB with a USB drive. The drive is not included. If you want a proper hard drive and terabytes, that's the HomeBase 3 (S380), which we list separately.
No. Face recognition, cross-camera tracking and 24/7 recording are HomeBase 3 features. The HomeBase 2 records event clips and does it reliably — that's the job it was built for.
The manufacturer states eufyCam 2, 2 Pro, 2C and 2C Pro support HomeKit and need to be connected to a HomeBase 2 for it. If Apple Home is why you're here, this is the correct hub.
Message us with your order number and a short video of the problem. Inside 12 months, faulty or not as described means CamGuard covers the return postage. Your Australian Consumer Law rights apply either way.
Item specifics
Close the door. Forget it exists.
That's the highest compliment you can pay a HomeBase. Plug it in, pair your 2-series cameras, shut the cupboard, and let it get on with quietly running the whole system for the next few years.
eufy HomeBase 2 (S280) — Manufacturer Renewed, Excellent
Out of Townsville within one business day. Australia Post Express included on every order over $99.00.
CamGuard Australia is an independent reseller of genuine eufy Security products. All trademarks belong to their respective owners; CamGuard Australia is not affiliated with, endorsed by, or an authorised agent of Anker Innovations. The 12-month CamGuard warranty offered here is our own in-house warranty and is not a manufacturer warranty; it applies in addition to your rights under the Australian Consumer Law.
Condition is as described in the listing title, the condition callout and the photos. Refurbishment and testing of renewed stock is carried out by the manufacturer's renewal programme. All prices in Australian dollars. Specifications are manufacturer-stated and were checked against the manufacturer's own product pages and support articles at the time of writing. Dispatched from Townsville, Queensland.
ABN 62 385 894 763